- Rotates glass or metal gobo patterns in opposite directions
- Ideal for any applications where consistent performance over prolonged periods is required
- Variable speed motor drive can be controlled and programmed by DMX signal or set to preprogrammed settings
- Select from GAM’S large collection of ‘B’ size patterns or custom designs, glass or metal.
GOES Non-Indexing TwinSpin™ shall be designed and manufactured
to mount in the optical gate of the GOES outdoor light
fixture. Metal frame shall be made from 0.167 inch (.424 cm.)
thick cold rolled steel. TwinSpin™ shall position two patterns
in the optical gate of the fixture and be able to rotate them in
opposite directions. Used with appropriate power supply, the
unit may be controlled and programmed from a DMX signal or
set to preprogrammed sequences. |
|
|
| Dimensions: |
|
| Width: |
4 1/2 in. (11.43 cm.) |
| Height: |
9 in. (22.86 cm.) |
| Depth: |
2 7/8 in. (6.19 cm.) |
| Weight (w/connectors): |
1.24 lbs.,(0.56 kgs.) |
| Finish: |
Powder Coated Black |
| Power: |
120v AC or 230v AC |
| Connector: |
4-pin, Low Voltage |
| Cable: |
24 in. (61 cm.) #18 AWG
Heat Resistant Fiberglass Sleeve |
| Ring Speed: |
Slow Speed - 0.14 rpm
Fast Speed - 11 rpm |
| Pattern Size: |
’B’ Size - 3 3/8 in. (8.6 cm.) |
| |
|
| Item # |
Description |
| TS5222 |
GOES Internal Indexing TwinSpin™ |
| Power supplies are required in both stand alone and DMX operation.
DMX cable and power cables supplied by others. Power supply options
are as follows: |
| TSPS-120 |
Dual power supply, DMX control,
120v (with power x-former) |
| TSPS-230 |
Dual power supply, DMX control,
230v (with power x-former) |
|
|
| |
GOES Non-Indexing TwinSpin™ shall be secured to its mounting by two captive SouthCo spring loaded nuts. Stepping
motor will drive two high temperature Teflon® belts so arranged as to drive the pattern rings in opposite directions. High
temperature drive belts shall be guided by Teflon® rollers to insure quiet and smooth operation. An optical sensor shall
be mounted in the front plate of the metal framework above the motor (NEMA type 23) for precision positioning of the
rotation. Motor and optical system shall be driven by separate power supply (required - see separate specifications).
The overall dimensions of the GOES Non-Indexing TwinSpin™ shall be 4-1/2 inches (11.43 cm.) wide by 9 inches
(22.86 cm.) long by 2-7/16 inches (6.19 cm.) deep. The weight of this unit with connectors shall be 1.24 lbs.(0.56 kgs.).
Finish is powder coated black. Connected to this motor is a flexible 8-wire control and power cable measuring 24
inches (61 cm.) long, terminating in two Melmex four-pin connectors, and sleeved in a high temperature fiberglass
protective jacket. GOES Indexing TwinSpin™ shall be model no. TS5222 as manufactured by GAMPRODUCTS, INC.
of Los Angeles, California. |
| |
|
