GOES1535 | Specifications | Instructions | Applications | Parts List | Purchase | Help


GOES DUAL POWER SUPPLY SPECIFICATIONS

Click to view separate
GOES DUAL POWER SUPPLY
Specifications or download PDF
GOES Dual Power Supply Specifications

 
   
  • Four screw terminals for connecting power
    transformer and DMX signal.
  • Three 4-pin Molex type male connectors: two
    are for the rotator, one for the motor drive, the
    second for indexing detection, and a third for
    connecting the Dowser.
  • Four 10-position rotating switches for setting
    mode and channel select.
  • Two LEDs, one green indicating DMX signal and
    one red indicating power.
Dimensions:  
Width: 4¾ in. (11.93 cm.)
Height: 2 5/8 in. (6.66 cm.)
Depth: 1 9/16 in. (3.96 cm.)
Weight
(w/ connectors):
1.24 lbs.,(0.56 kgs.)
Finish: Powder Coated Black
Power: 90v AC to 240v AC
50 or 60 Hertz
15v DC Output
Connector: 4-pin, Low Voltage
 
Item # Description
TSPS-120 GOES Dual power supply, DMX control, 120v (with power x-former)
TSPS-230 GOES Dual power supply, DMX control, 230v (with power x-former)
 

The GOES Dual Power Supply shall be housed in a zinc die cast metal box measuring 4-3/4 in. (11.93 cm.) wide, 2-5/8 in. (6.66 cm.) high and 1-9/16 in. (3.96 cm.) deep. The finish shall be powder coated black. On the face of the unit shall be mounted the following items: four Dual Screw Terminals, three 4-pin Molex-type male connectors, one red and one green LED for indicating power and DMX signal, four 10-position rotating modechannel setting switches. On the face shall be clearly screened and legible in white lettered labels for each of the items listed above. All of the electronics shall be mounted to the face plate of the box.

Mounted inside the Dual Power Supply shall be the drive electronics control for two units, the GOES Dowser and GOES Indexing or Non-Indexing TwinSpin™. The Power Supply shall be able to accept DMX signal for commanding the Dowser or the Indexing TwinSpin™. It will also have a series of built-in functions which can be programmed from the ten position rotating switches for operation without a DMX signal. The Dual Power Supply electronic control shall be as manufactured by GAMPRODUCTS, INC. model number TSPS-120 (120 Volt) or TSPS-230 (230 Volt).

 

 

   



 

 

 


 



The time in Los Angeles, California is 03:33 am Thursday, August 28, 2008. The GAM staff is on duty to answer your questions from 8:00 a.m. to 5:00 p.m., Monday through Friday (except holidays). For assistance, call toll free in the US and Canada 888-GAMCOLOR or 323-935-4975 (Country code 1).